0.05% FS including non-linearity, hysteresis,repeatability

  temperature effects from -10°C to 50°C

 Burst pressure is 2x working pressure

 (exception, 1400 bar; burst pressure 29,000)

 kPa, MPa, kg/cm2, psi, mbar, bar, inHg, inH2O, mH2O

mmH2O mmHg

 circular twenty segment bar graph(pressure from 0 to 100%FS)

 Two times per second

 The minimum and maximum pressure values

 capture and display the open and closed values from an external  pressure switch. Maximum switch impedance 200 Ω.

 provide a 0 to 5 V output signal

 voltage output mode provides 0.1% FS accuracy.

 The alarm output consists of an open drain field effect transistor  (maximum current 250 mA, maximum voltage 24 VDC)

rotate 320° around the pressure fitting

 transfer of data to a PC with the optional serial lead (IA4090-2- V0).  Using this link all menu commands and display data

 via an ASCII command set or the optional SiCal Pro Software.

 Up to 99 DPI 104 instruments can be connected together

 in a daisy  chain-configured network.

 UPM modules can be connected to the DPI 104 to enhance the  accuracy and extend the pressure range.

 9V alkaline battery.

 Battery life is six months when used daily for one hour per day.

 CE marked

remotely through a virtual instrument panel on the PC screen.

 The calibration data can be logged, viewed and printed in graphical  format or as a calibration certificate.

 -20°C to 70°C

 Diameter: 95 mm excluding pressure fittings
 Depth: 55 mm

 350 g

 To Def Stan 66-31, 8.4 Cat III

 To BS EN 61010:2001

 EMC: BS EN61326-1:1998 + A2:2001
 Electrical Safety: BS EN 61010:2001
 Mechanical Safety Pressure Equipment Directive_Class: Sound  Engineering Practice (SEP)

 * external power supply unit with lead p/n 191-350
 * PC serial lead for connection to PC p/n IA4090-2-V0.

   (Note: Option A is recommended with PC serial lead.)
 * SiCalPro software p/n 1S-SiCALPRO-DPI104

   (includes IA4090-2-V0)
 * Mating plug for eight-pin socket for switch test, voltage output,

   external power and alarm function (customers wishing to make

   their own connections/leads) p/n 1S-04-0027
 * DPI 104 UPM power lead for use with UPM IDOS Sensor

   p/n IA4101-1-V0. Requires Option H.
 * Universal 12V external power supply for use with the UPM IDOS    remote sensor p/n 191-129

 DPI 104; ranges to 30 psi (2 bar),

 PV 210 low pressure pneumatic test pump,

 hose, adaptors, seal kit and case.

 DPI 104; ranges to 300 psi (20 bar),

 PV 211 pneumatic test pump,

 hose, adaptors, seal kit and case.

DPI 104; ranges to 15,000 psi (1000 bar),

 PV 212 hydraulic test pump,

 hose, adaptors, seal kit and case.

 DPI 104; ranges to 10,000 psi (700 bar),

 PV 411A combined pneumatic and hydraulic test pump,

 hydraulic reservoir, hose, adaptors, seal kit and case.